C1003 | Dual closed-loop electronic speed controller

Power Indicator: Indicates whether the speed controller is receiving power normally;

Adjustable Starting Fuel Quantity: Adjusts the exhaust smoke during engine start-up;

Maximum Fuel Quantity Limit: Limits the maximum fuel injection quantity of the fuel pump to prevent overuse of the engine;

Speed Control and Fine-Tuning: Employs a dual closed-loop system to control speed, allowing for precise adjustment and remote control;

Adjustable Acceleration Time: Adjusts the acceleration time from idle to rated operating conditions;

High/Low Speed Conversion: Allows switching between idle and rated operating conditions;

Adjustable Steady-State Rate of Change (Speed Drop): The steady-state rate of change range is adjustable;

Parallel Operation Function: Enables parallel operation of multiple generator sets via manual or automatic parallel operation;

Full-range speed regulation: Enables continuous and smooth adjustment of speeds within a certain range;

Automatic stop protection: Automatically stops the engine when the speed signal disappears or the controller loses power;

Power supply voltage: DC24V (range 18V～32V)

Power consumption:<0.1A (excluding actuator)

Control frequency: 1000～13000Hz

Speed fluctuation rate: ≤±0.25%

Steady-state speed regulation rate: 0～5% adjustable

Transient speed regulation rate: ≤10%

Ambient temperature: -40℃～+80℃

Ambient humidity: < 95%

Protection Rating: IP44