EN 
AR
NL
FR
DE
IT
JA
KO
PL
PT
RU
ES
TL
ID
UK
VI
TH
TR
FA
MS
BE
AZ
BN
NE
MY
XH
FPSS8607-G50 Diesel Generator Synchronization and Grid Connection Module
FPSS8607-G50 parallel controller is a manual/automatic parallel system for single or multiple generator sets with the same capacity or different capacity, realizing the functions such as automatic startup/shutdown/parallel operation, data measurement, alarm protection and "three remote". The controller adopts a high-resolution 7-inch color LCD screen displaying Chinese and English, with simple and reliable operation.
1. High-end genset parallel and grid-connected controller, supporting 32 gensets grouped in parallel, which can realize 256 gensets power station parallel and grid-connected control scenarios;
2. Supports high and low voltage parallel and grid control;
3. Supports ECU engine;
4. Equipped with seven-inch LCD, which enables all operating parameters of the generator set displayed in the main interface, without frequent page flipping, making it more convenient to use;;
5. Heavy duty heat dissipation structure design, adaptable to harsh environments;
6. Optional built-in cloud module, with fault recording function, supports cloud service one-key repair report, remote fault diagnosis, remote parameter adjustment, locking and unlocking of gensets; help customers to improve service efficiency and reduce service costs;
7. Dual-CPU chip architecture, realizing intelligent control on the basis of automation, more intelligent use;
8. With power quality monitoring function;
9. Branded customization available;
Description
>>>FPSS8607-G50 parallel controller is a manual/automatic parallel system for single or multiple generator sets with the same capacity or different capacity, realizing the functions such as automatic startup/shutdown/parallel operation, data measurement, alarm protection and "three remote". The controller adopts a high-resolution 7-inch color LCD screen displaying Chinese and English, with simple and reliable operation.
FPSS8607-G60 Genset and Mains Parallel Controller is suitable for the manual/automatic parallel operation of a single generator set with the mains. It achieves automatic start/stop, parallel operation, data measurement, alarm protection, and "three-remote" functions. The controller for the generator set and mains parallel operation has the functions of controlling GOV and AVR. There are various modes for parallel operation with the mains, such as constant active power and reactive power/power factor output of the generator set, mains peak-cutting function, and uninterrupted recovery to mains power supply function. The controller accurately monitors various operating states of the generator set. When the generator set is operating abnormally, it automatically trips and shuts down the generator set, while displaying the fault status on the LCD.
The FPSS8607-G80 Unit Busbar Parallel Controller is designed for the manual/automatic parallel operation of busbars from multiple generator sets, enabling the parallel operation of two busbars. The FPSS8607-G80 Unit Busbar Parallel Controller controls a busbar connection switch. When the busbar connection switch needs to be closed, the controller synchronizes the two busbars through the MSC CAN bus. Once the synchronization conditions are met, the busbar connection switch closes, allowing the parallel operation of the two busbars.
